Cảm biến vị trí CMSX-P-S-C-U-F1-D-130-A 3929312
Positioner CMSX-P-S-C-U-F1-D-130-A 3929312
Positioners CMSX
Key features
Function and application
The positioner CMSX is used to control the position of single- and double-acting
pneumatic actuators and double-acting linear actuators in process automation
systems. It is suitable for operation with actuators that have a swivel angle of
approx. 90° and a mechanical interface in accordance with VDI/VDE Directive
3845. The CMSX enables simple and efficient position control based on the PID
control algorithm. Positions are specified via a setpoint signal. The integrated
potentiometer senses the current position of the quarter turn actuator via the
shaft and forwards the measured value to the internal regulator. The regulator
compares the setpoint value specified by analogue means with the measured
value and actuates the solenoid valves accordingly via pulse-width modulation
(PWM).
| Ordering data Positioner |
Standard nominal flow rate [l/min] |
Sensing range in degrees [deg] |
Part No. Type |
| Can be set to open or close in the event of a system failure |
50 | 0 … 100 | 3929313 CMSX-P-S-C-U-F1-D-50-A |
| 50 | 3929370 CMSX-P-S-C-U-F1-S-50-A | ||
| 130 | – | 3929539 CMSX-P-SE-C-U-F1-D-130-A |
| Ordering data Positioner |
Standard nominal flow rate [l/min] |
Sensing range in degrees [deg] |
Part No. Type |
| Can be set to open or close in the event of a system failure |
130 | 0 … 100 | 3929312 CMSX-P-S-C-U-F1-D-130-A |
| 3929369 CMSX-P-S-C-U-F1-S-130-A | |||
| Maintain position in the event of a system failure |
130 | – | 3929540 CMSX-P-SE-C-U-F1-D-130-C |
| 0 … 100 | 3929314 CMSX-P-S-C-U-F1-D-130-C | ||
| 50 | 3929315 CMSX-P-S-C-U-F1-D-50-C |
