Cáp lập trình Adapter NEFC-M12G5-0.3-U1G5 Nhập Khẩu Chính Hãng

Cáp lập trình  Terminal CPX

Adapter  NEFC-M12G5-0.3-U1G5         547432

Terminal CPX
Technical data – CPX Maintenance Tool
Function
CPX Maintenance Tool (CPX-FMT) combines service software with a connecting adapter. The service software is
a tool for the design, parameterisation
and online diagnostics of the CPX
terminal. The USB-to-M12 adapter
features built-in galvanic isolation
(between CPX and PC) and enables
a PC to be connected to the diagnostic
interface of the CPX terminal.
Adapter
Software on CD-ROM

Application
Only from Festo
The CPX-FMT software enables access to CPX valve terminals via Ethernet and the bus nodes EtherNet/IP (FB 36), Sercos III (FB 39) and PROFINET (FB 33, FB 34, FB 35, FB 41). The bus nodes or control block can be connected directly to the PC via a USB adapter from Festo.. Similar to the CPX-MMI, diagnostic data such as the error trace or module diagnostics can be read out and parameters can be modified in plain text. In contrast to the CPX-MMI, the data can be used directly on a PC. There is an option, for example, to send screenshots of a configuration or the current error trace directly via e-mail. In addition, CPX configurations can also be saved and archived directly as a CPX-FMT project. Undocumented changes can subsequently be identified using the online/offline comparison function. On-site tests such as the actuation of valves or the emulation of sensor feedback (in both cases called “forcing”), for example, can be performed without an existing controller infrastructure. It must be noted that with both the CPX-FMT and the CPX-MMI, only local parameters on the CPX valve terminal can be changed and saved. The configuration of the networks or controller software cannot be influenced.