Pressure regulator LRMA-QS-6 153496
Pressure regulators LR, LRMA
-M- Flow rate
22 … 127 l/min
With threaded and push-in
connector
Screw-in thread
M5, Rx, R¼
Push-in connector
for tubing O.D. 4 … 8 mm
Push-in connector, can be rotated
360°
The pressure regulator maintains an
essentially constant output pressure
on the secondary side independent of
pressure fluctuations on the primary
side and air consumption.
The primary pressure at the screw-in
thread is reduced when air is
exhausted from the QS push-in
connector.
Differential pressure regulators LRL, LRLL
-M- Flow rate
30 … 760 l/min
With threaded and push-in
connector
Screw-in thread
M5, Rx, R¼, Ry, R½
Push-in connector
for tubing O.D. 4 … 12 mm
Push-in connector, can be rotated
360°
The differential pressure regulator
maintains a manually adjusted
differential pressure between the
primary pressure at the screw-in
thread and the output pressure at the
QS push-in connector.
Pressure applied at the QS push-in
connector can be exhausted with no
change in pressure at the thread
connection end thanks to an
integrated non-return valve.
-M- Flow rate
22 … 127 l/min
With threaded and push-in
connector
Screw-in thread
M5, Rx, R¼
Push-in connector
for tubing O.D. 4 … 8 mm
Push-in connector, can be rotated
360°
The pressure regulator maintains an
essentially constant output pressure
on the secondary side independent of
pressure fluctuations on the primary
side and air consumption.
The primary pressure at the screw-in
thread is reduced when air is
exhausted from the QS push-in
connector.
Differential pressure regulators LRL, LRLL
-M- Flow rate
30 … 760 l/min
With threaded and push-in
connector
Screw-in thread
M5, Rx, R¼, Ry, R½
Push-in connector
for tubing O.D. 4 … 12 mm
Push-in connector, can be rotated
360°
The differential pressure regulator
maintains a manually adjusted
differential pressure between the
primary pressure at the screw-in
thread and the output pressure at the
QS push-in connector.
Pressure applied at the QS push-in
connector can be exhausted with no
change in pressure at the thread
connection end thanks to an
integrated non-return valve.








Ordering data | Description | Screw-in thread |
For tubing O.D. [mm] | Part No. Type |
With QS push-in connector and metric thread with sealing ring | M5 | 4 | 153488 LRMA-M5-QS-4 | |
6 | 153490 LRMA-M5-QS-6 | |||
With QS push-in connector and PTFE-coated pipe thread | Rx | 4 | 153489 LRMA-x-QS-4 | |
6 | 153491 LRMA-x-QS-6 | |||
8 | 153493 LRMA-x-QS-8 | |||
R¼ | 6 | 153492 LRMA-¼-QS-6 | ||
8 | 153494 LRMA-¼-QS-8 | |||
With QS push-in connector at both ends | – | 4 | 153495 LRMA-QS-4 | |
6 | 153496 LRMA-QS-6 | |||
8 | 153497 LRMA-QS-8 |
Ordering data | Description | Screw-in thread |
For tubing O.D. [mm] | Part No. Type |
With QS push-in connector and metric thread with sealing ring | M5 | 4 | 153488 LRMA-M5-QS-4 | |
6 | 153490 LRMA-M5-QS-6 | |||
With QS push-in connector and PTFE-coated pipe thread | Rx | 4 | 153489 LRMA-x-QS-4 | |
6 | 153491 LRMA-x-QS-6 | |||
8 | 153493 LRMA-x-QS-8 | |||
R¼ | 6 | 153492 LRMA-¼-QS-6 | ||
8 | 153494 LRMA-¼-QS-8 | |||
With QS push-in connector at both ends | – | 4 | 153495 LRMA-QS-4 | |
6 | 153496 LRMA-QS-6 | |||
8 | 153497 LRMA-QS-8 |